Tag: Arduino IDE

This post talks about how you can add the Heltec ESP32 library to the Arduino IDE and use it to test your Heltec ESP32.

This guide runs you through the basic steps to configure the Arduino IDE for the MakerHawk Heltec ESP32 LoRa Development Board.

In this blog post I talk about how you can use a SW-420 Motion Vibration sensor with a WeMos D1 Mini (ESP8266) using the Arduino IDE.

In this blog post I talk about the additional steps needed to use the DS18B20 onewire temperature sensor with a WeMos D1 Mini (ESP8266) using the Arduino IDE.

In this blog post I talk about the additional steps needed to use the DHT22 temperature sensor with a WeMos D1 Mini (ESP8266) with the Arduino IDE.

In this blog post I talk about the additional steps needed to use the DHT11 temperature sensor with a WeMos D1 Mini (ESP8266) with the Arduino IDE.

Here I explain the difference in pin numbering for the WeMos D1 Mini compared to an Arduino and include a sample blink sketch.

This blog post describes what you can do if Windows doesn’t recognise the Wemos D1 Mini and there is no COM port to use it.

This guide runs you through a basic set of steps to configure the Aduino IDE to program a Wemos D1 Mini Pro ESP8266.