Cloning a Raspberry Pi SD Card to another
To set up my cluster I want to create single SD card image then run this same image on multiple Pi’s. This means I wont need to set up each Raspberry Pi at a time. One of the ways you can do this is by taking an image of the raspberry Pi then flashing that image to many SD cards. Here I detail the process I took to clone the Raspberry Pi image.
This is also an effective way of backing up your Raspberry Pi as you can then restore the full image at a later date if needed.
Writing the Raspberry Pi Image
Before I wrote the image I prepared my Raspberry Pi and installed all required software on it. Once I was happy that I had all the software I wanted I then began the imaging process.
When I put the SD card into my computer it shows as two different drives due to the partitioning. It is important to note the letter of the boot drive. If windows tries to get you to format one of the drives make sure you do not do this. This is because Windows does not understand the filesystem format and formatting it will lose your data.
To image the SD card I recommend using Win32 Disk Imager.
Part of the reason for the recommendation is that this is the recommended tool to burn Raspbian to a SD card. This meant I already had it installed and had used it before.
Running Win32 Disk Imager allows you to create the image. First you need to pick the location to store it and the device drive to read from. In this case I have selected k:\ drive as this is the boot drive of the Raspberry Pi. The entire SD card will be read so I don’t need to worry that the SD card has two partitions.
Pressing read will clone the SD card to your computer. This gives us the image we can use to clone the SD card.
Restoring the Raspberry Pi Image
Once you have the image it is a simple process to write to the new SD card. The same interface above will be used instead to write the image. This time you pick the file to write, the device (which drive letter) and then press write.
This method will only work when cloning SD cards from either the same size or larger than the original. If you clone to a larger SD card then you will need to expand the filesystem later on the Raspberry Pi.
This method can also be used to backup your Raspberry Pi in the event of SD card corruption.
Encryption using Veracrypt on the Raspberry Pi Cluster
Grant sudo access for a user with Raspberry Pi Raspbian
Raspberry Pi Cluster Node – 14 A simple webserver
About Author
Chewett
Leave a Reply to JonathanCancel reply
This site uses Akismet to reduce spam. Learn how your comment data is processed.
Have you looked into cloning but with unique IDs and configurations, so that you wouldn’t need to boot and modify? I am playing around with this so they I can quickly build separate leaves for my pi zero bramble. Just looking around for some ideas.
Hi Ross,
When you say “Cloning but with unique IDs and configurations” what do you precisely mean by that? The main “problem” with cloning the pi is that you an exact copy with no changes to hostname/files etc.
Another way of setting up multiple Rasperry Pi machines is using an autoconfiguration setup such as puppet which I am looking to blog about soon.
Have you looked into some kind of automated creation process such as puppet? It sounds like what you are looking to create.
Thank you very much! Helped so much!